Shutting Down The System - Sony SRX-R815P Operating Instructions Manual

Shutting Down the
System
1
Tap on the upper right of the screen.
2
Select [Shutdown], and then tap [OK].
3
Tap [OK] when the confirmation screen appears.
The projection system will shut down.
The MAIN indicators and LIGHT indicators on the
rear of the projectors will turn to blinking green while
cooling. Once cooling is complete, the LIGHT
indicators will turn to solid red. Leave the system as it
is at this point.
4
Once the MAIN and LIGHT indicators turn solid red,
and the main projector's IMB indicator begins
blinking red (the sub projector's IMB indicator will
remain red), move the power switch to off (a) to turn
off the power.
Caution
If, after shutdown, the power switch on the rear of a
projector is not turned off and only the server is turned on,
the IMB on the main projector will not power on. If this
happens, the IMB indicator will blink red. Turn the power
switch off, and then turn the power on again.
19