2
Register the calibration SPL that you created to the
schedule.
Select the appropriate calibration frequency (daily,
weekly, etc.).
For details, see "Creating a Schedule" (page 32).
Attaching and Removing
the Lens
Before changing the lens
The projection system must be shut down, and the
projector switch must be set to off before changing the
lens.
Caution
The projector uses a laser as a light source. If the lens is
removed while the projector is lit, the projector is
automatically turned off. You cannot turn on the projector
with the lens removed.
Changing the lens while the power is on may damage the
projector.
1
Shut down the projection system.
2
Move the projector power switch to the off position.
For detailed steps, see "Shutting Down the System"
(page 19).
38