2-2. Installation of Lens
n
. When performing the installation/removal of lens, be sure to shut down the system, then turn off the
power switch on the rear of the projector.
. When performing the installation/removal of lens, be careful not to touch the lens board.
1. Raise the lens fixing lever toward the "
released).
n
If you raise the lens fixing lever without pushing the lock button, the lock button and lens fixing lever
will be damaged. Be sure to push the lock button and check that the lock is released before raising the
lever.
2-2 (E)
Board
" side with the lock button pushed all the way in (lock
Lock button
Lens fixing lever
Digital Cinema Dual System