Sony LKRA-009 Installation Manual page 164

7. Set the notation of the control command in the "Command Type" pane.
Select TEXT or BINARY.
8. Type the control command in the "Command" pane using the notation specified in the "Command
Type" pane.
When TEXT is selected:
When BINARY is selected: Use the hexadecimal notation without adding prefix or suffix of "0x" or
t
A maximum of 255 characters can be entered in the "Command" pane. Therefore, it is possible to
send the control command of up to 255 characters when TEXT is selected and up to 85 byte when
BINARY is selected.
7-6 (E)
Type the control command as a text character string.
"h". Use "," as the separator of value.
Example)
If you want to send "0xFA", 0xF1, 0x01 or 0x0D, type "FA,F1,01,0D" or
"fa,f1,01,0d". "End Of Line" is effective only when "TEXT" is chosen as
"Command Type". In this box, linefeed code can be selected at the end of
control command. The choice is from NONE, CR (0x0D), LF (0x0A),
CR + LF (0x0D 0x0A).
Digital Cinema Dual System