Sony LKRA-009 Installation Manual page 29

5. Pull the knob and tilt the touch panel monitor in the direction of the arrow.
t
When you pull the knob, the touch panel monitor can be moved, and when you release the knob, the
touch panel monitor is fixed.
6. Connect each cable to the connector on the bottom of the touch panel monitor.
7. Fix the cable with the two cable clampers.
8. Pull the knob and return the tilt of the touch panel monitor to the original position.
Touch panel monitor
Cable clamper
Cable
Cable clamper
Digital Cinema Dual System
Touch panel monitor
RS-232C terminal
(for service)
VGA terminal: VGA cable (accessory)
(To the VGA terminal of the server)
Knob
Power input terminal:
AC adaptor cable
(accessory)
(To the AC adaptor)
TPC terminal: USB cable (accessory)
(To the TPC terminal of the server)
2-9 (E)