Power Cord; Installation Of Cru Dataport Carrier - Sony LKRA-009 Installation Manual

3-4. Power Cord

To get a power cord, please contact your local Sony Sales Office/Service Center.
w
. Use the approved Power Cord (3-core mains lead)/Appliance Connector/Plug with earthing-contacts
that conforms to the safety regulations of each country if applicable.
. Use the Power Cord (3-core mains lead)/Appliance Connector/Plug conforming to the proper ratings
(Voltage, Ampere).
. Never use an injured power cord.

3-5. Installation of CRU DATAPORT Carrier

The CRU DATAPORT carrier is attached to CRU DATAPORT of the server.
Please purchase and install the CRU DATAPORT carrier as required.
1. Remove the front panel from the server. (Refer to step 2 in Section 3-1-1.)
2. Remove the screw, then remove the harness.
3. Remove the two screws, then remove the CRU unit assembly.
3-6 (E)
CRU unit assembly
PSW3 x 6 PSW3 x 6
Harness
Digital Cinema Dual System