Installing/Removing Power Modules - Siemens SIMATIC NET RUGGEDCOM RX1511 Installation Manual

3.
4.
5.
4.3

Installing/Removing Power Modules

The RUGGEDCOM RX1511 supports a single power module.
1
Figure 4.4
RUGGEDCOM RX1511
Installation Manual, 12/2019, C79000-G8976-1056-16
Insert the new module into the slot.
Module
1
Chassis
2
Screw
3
Figure 4.3 Installing a Module
Tighten the screws to secure the module.
[Optional] If necessary, install the device in the rack.
Power Module
Power Module
4.3 Installing/Removing Power Modules
1
2
3
1
Modules
39