Installing The Cable Glands (Optional, +H376) - ABB ACS355 Series Supplement Manual
Drives with ip66/67 / ul type 4x enclosure (0.37...7.5 kw, 0.5...10 hp)
Hide thumbs
Also See for ACS355 Series:
- Installation manual ,
- User manual (437 pages) ,
- Quick start up manual (139 pages)
Table of Contents
Advertisement
Installing the cable glands (optional, +H376)
Note: The lead-throughs are only meant for sealing the enclosure. Do not use them
for grounding.
1. Remove the sticker labeled REMOVE BEFORE USE.
2. Tighten the cable glands that you want to use with their back nuts. The tightening
torque depends on the cable gland size. See
3. Lead the cable through the gland and tighten until the gasket of the lead-through
is tightly around the cable. The cable diameter depends on the cable gland size:
• M12: 3.5...7.0 mm
• M25: 9.0...17.0 mm
• M32: 11.0...21.0 mm
1
3
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Tightening torques
2
37
on page 38.
Mechanical installation
Advertisement
Table of Contents
