Operation Manual / TPS44-F.. - TPS61-F..
8 Disassembly and assembly / 8.5 Radial clearances N and R
Measuring N and R
Radial clearances N and R
© Copyright 2020 . All rights reserved.
The mean values measured must be within the permissible values of the
radial clearance N and R.
Product
TPS44
TPS48
TPS52
TPS57
TPS61
CAUTION
Clearances out of tolerance
Clearances out of tolerance and excessively worn components can be
the cause of serious damage to machinery and property.
Have components assessed and, if necessary, replaced by an ABB
u
Turbocharging Service Station.
HZTL2412_EN
N [mm]
0.15 ... 0.49
0.22 ... 0.58
0.30 ... 0.67
0.40 ... 0.86
0.50 ... 0.94
Rev.G
R [mm]
0.36 ... 0.67
0.47 ... 0.77
0.59 ... 0.92
0.75 ... 1.11
0.90 ... 1.32
March 2020