ABB TPS48-F Series Operation Manual page 93

Operation Manual / TPS44-F.. - TPS61-F..
8 Disassembly and assembly / 8.3 Disassembling and assembling tur-
bocharger
Nozzle ring press fit for
multiple inlet turbine cas-
ing
© Copyright 2020 . All rights reserved.
Calculate the press fit (PD) as shown.
u
NOTICE
If the calculated value (PD) is outside ±0.2 mm, an official ABB Tur-
bocharging Service Station must be contacted.
Measure the axial and radial clearances (see the section Axial and ra-
u
dial clearances).
HZTL2412_EN Rev.G March 2020