ABB TPS48-F Series Operation Manual page 20

Hide thumbs Also See for TPS48-F Series:
Table of Contents

Advertisement

Operation Manual / TPS44-F.. - TPS61-F..
2 Safety / 2.6 Safe operation and maintenance
© Copyright 2020 . All rights reserved.
Safety during start-up / commissioning and operation
WARNING
The turbine casing insulation of the TPS44-F supplied by ABB is also
burst protection
Serious personal injuries or fatal accidents can occur, if the turbine cas-
ing insulation of the TPS44-F supplied by ABB is removed. The burst
protection is integrated into the turbine casing insulation of the TPS44-
F supplied by ABB.
Separate burst protection is fitted to TPS44-F turbochargers that have
been ordered from ABB without insulation.
Never operate TPS44-F turbochargers that have been supplied by
u
ABB with insulation if this insulation from ABB is not in place.
Never operate turbochargers without burst protection. If the insula-
u
tion from ABB is not in place, the separate burst protection (57200)
must be fitted before operation (see
→110).
part numbers
Before starting work, carry out visual inspection of working area.
u
Remove any obstacles and objects lying around.
u
Before start-up / commissioning, check all pipes from and to tur-
u
bocharger for damage and leaks.
Don't work in any way that could impair safety when working on tur-
u
bocharger.
After about every 12 hours of operation or at least once a day, inspect
u
turbocharger for visible damage and defects.
Immediately report any damage or changes in operational perform-
u
ance to person responsible.
If damage is discovered, immediately shut down turbocharger and se-
u
cure it against inadvertent or unauthorized use.
When switching on auxiliary power sources (hydraulics, pneumatics,
u
electricity, water), keep an eye open for any hazards resulting from
supplying these power sources.
Safety during cleaning
If cleaning agents or solvents are used for cleaning, the corresponding
material safety data sheet and the safety instructions in section "Haz-
ards due to operating and auxiliary materials" must be observed.
Observe the material safety data sheet for the cleaning agent or
u
solvent.
Wear personal protective equipment (PPE) according to the material
u
safety data sheet.
HZTL2412_EN
View of turbocharger showing
Rev.G
March 2020

Advertisement

Table of Contents
loading

Table of Contents