4.2
Date and Time Settings
Set the date and time of the network camera. These settings are not required if they have already been set at initial startup.
1.
From the live view window, select [Settings] [System] [Date and time].
2.
Turn off "Automatic date and time" and set the time manually.
When an NTP server is present in the same segment as the programmable controller, turn on "Automatic date
and time" and perform the time synchronization setting from the NTP server. In that case, the time setting FB
is not required.
4 NETWORK CAMERA SETTINGS
4.2 Date and Time Settings
4
21