External device configuration
Set the network camera to be connected.
[Navigation window] [Parameter] [PC Parameter] [Built-in Ethernet Port Setting] [Open Setting]
1.
Set the following items in the "Built-in Ethernet Port Open Setting" window.
• Open system (socket communications)
• TCP connection system (Active)
• Own station port number (1 to 4999, 5010 to 65534)
• IP Address of communication destination (IP address of the network camera)
• Port number of communication destination (80)
• An own port number from 1 to 1023 is used as a reserved port number (WELL KNOWN PORT NUMBERS)
generally, and a number from 61440 to 65534 is used in other communication functions. A number from
1024 to 4999 or 5010 to 61439 is recommended.
• Set 80 to the port number of the communication destination.
2.
Click the [End] button
5 PROGRAMMABLE CONTROLLER SETTINGS
5.3 MELSEC-Q Series CPU Module
5
49