Mitsubishi Electric MELSEC iQ-R Series User Manual page 45

■Example to create M+CameraRecord-E_AXIS_SetTime_R (Time setting)
This FB is executed once when the operating status of the CPU module is changed to RUN to set the time information of the
CPU module to the network camera.
■When bSetTime_EN (FB execution command) is turned on, the time of the CPU module is set to the network camera.
• Store the number of the slot where the RJ71EN71 or RnENCPU is installed in i_uIO (start I/O No.)
• The network camera is specified with i_uConnectionNo (Connection number).
• The network camera authentication is cleared with i_sUserName (User name) and i_sPassWord (Password).
• Global label
• Program
Input label Setting details
i_bEN On: The FB is activated.
Off: The FB is stopped.
i_uIO Set the start I/O number.
i_uConnectionNo Sets the connection number.
i_sUserName Sets the user name registered in the network camera.
i_sPassWord Sets the password registered in the network camera.
Output label Setting details
o_bENO On: The execution command is on.
Off: The execution command is off.
o_bOK The on state indicates that setting the time has been completed.
o_bErr The on state indicates that an error has occurred in the FB.
o_uErrId Returns the error code of an error occurred in the FB.
5 PROGRAMMABLE CONTROLLER SETTINGS
5.2 MELSEC iQ-R Series RJ71EN71, RnENCPU (Network Part)
Setting example

0
17
"root"
"Pass1234"
43
5