Original installation and operation manual
Illustration
56
2
9
35
6 mm (0.23")
60 mm (2.36")
50 mm (1.96")
1 N/-
2 L/+
PE
5
6
7
Normally Open (NO)
Common (CO)
Normally Closed (NC)
PE
Schutzleiter (PE)
N
Neutralleiter (N)
L
Phase (L)
Description / explanation
5. Raise the top cover [2] a little and pull the screw
terminal [56] of the power control board up and off.
6. Unscrew the pan-head screw [35] and take the power
control board [9] out of the top cover [2].
7. Prepare the 3-wire cable of the voltage supply.
H
8. Slide the components of the cable gland [5, 6, 7] over
the cable for voltage supply [H] and insert the cable
into the top cover.
9. Connect the voltage supply cable to the power control
board in accordance with the terminal diagram.
BEKOMAT
12, 12 CO, 12 CO PN63
®
27 | 64