Siemens MOBILETT Plus HP Installation And Setting Instructions Manual page 14

2 - 2
•
NOTE
Mount the main switch label 65 90 827 next to the mains switch as shown in Fig. 3. The
main switch label comes in different languages.
Then mount the other warning label 65 84 606 as shown in Fig. 3.
Fig. 3
•
Check the unit for cracks, fractures or other damages.
•
Make sure that neither the single tank nor the collimator has any mechanical defects
which would impair the radiation protection.
MOBILETT Plus HP
The following labels come in different languages. Pick the proper
ones and paste them according to Fig. 3.
SPR8-220.033.03
Rev. 02
Installation and setting
DANGER!
Explosion hazard.
Do not use in the presence of
flammable anaesthetics.
Read technical documents before
X-Ray Equipment.
removing the covers.
Classified by
R
Underwriters Laboratories Inc.
with Respect to Electrical Fire, Shock,
and Mechanical Hazards Only.
245 B
CERTIFIED TO THE REQUIREMENTS
OF THE CANADIAN ELECTRICAL
CODE. CSA HAS NOT INVESTIGATED
OTHER PHYSIOLOGICAL EFFECTS.
R
CERTIFI SELON LES EXICENCES DU
CODE CANADIEN DE L' LECTRICIT
LR56549C
L'ACNOR N'A PAS TUDI LES AUTRES
EFFETS PHYSIOLOGIQUES POSSIBLES.
This product complies with DHHS regulations
21 CFR Subchapter J. applicable at date of
manufacture.
Manufactured:
Siemens Aktiengesellschaft
Wittelsbacherplatz 2. D - 80333 M nchen
Germany
Always turn the main switch to C
when not using the MOBILETT.
Page 2 of 12
10.02 SPS-UD
Warning label
Main switch label
Siemens-Elema AB
Solna, Sweden