Required Documents; Required Tools, Measurement And Auxiliary Devices - Siemens MOBILETT Plus HP Installation And Setting Instructions Manual

1 - 2
Checks marked with this symbol are to be entered into the test certificate at the end of
these instructions.

Required documents

•
Instructions for Use
•
Service Instructions
•
Installation Instruction
Remote exposure switch system-optional
•
Maintenance Instructions including DHHS...
U
S
A

Required tools, measurement and auxiliary devices

NOTE
•
Standard service equipment*
•
Digital multimeter
•
kV measurement device (works with the filter comparison method)
•
Protective ground/earth meter
•
Equivalent leakage current meter
U
•
Storage oscilloscope with ± 2.5 % accuracy
S
A
U
•
Dose meter
S
A
MOBILETT Plus HP
All tools, measurement and auxiliary devices with the exception
of those marked " * " , are listed along with their specifications in
the STC (Service Tools Catalogue).
SPR8-220.033.03
Rev. 02
SPR8-220.201...
SPR8-220.061...
SPR8-220.031.02...
SPR8-220.101...
Page 2 of 8
10.02 SPS-UD
General
1
1
Siemens-Elema AB
Solna, Sweden