Cleaning And Maintenance - Silvercrest SHBR 560 B1 Operating Instructions Manual

Fig. 18
Activate the continuous spray function during cleaning with both forward and
backward movements with the appliance. This way, the cleaning solution is
evenly applied to the hard floor via the rotary brush
Press the cleaning solution switch
spray function.
NOTE
► When cleaning carpets, if you activate the cleaning solution switch
twice as much cleaning solution is applied to the rotary brush
hard floor cleaning.
► To allow carpets to dry more quickly after cleaning, move the appliance
several times over the carpet. Do not activate the continuous spray function
while doing so and do not hold down the cleaning solution switch
Press the carpet switch

Cleaning and maintenance

RISK OF ELECTRICAL SHOCK!
► Switch the appliance off and pull out the mains plug before cleaning the
appliance!
ATTENTION! PROPERTY DAMAGE
► Do not use caustic, abrasive or solvent-based cleaning materials. These can
damage the surfaces of the appliance.
NOTE
► Empty the waste water tank
► Clean the dirt filter
putting it back into the waste water tank
■ 98 │ GB │ MT
2 x
Fig. 19
t
once again to deactivate the continuous
e
again to switch the appliance off (see fig. 17).
2
after every use.
0
after each use and let it dry completely before
6
.
6
2
.
SHBR 560 B1
t
,
as during
t
.