Silvercrest SHBR 560 B1 Operating Instructions Manual page 95

NOTE
► If you want to remove the hand element
first remove the fresh water tank
of the hand element
you have removed the fresh water tank
element
pull the hand element
Wind the power cable
retainers
Fig. 3
The parking and cleaning station consists of a storage tray
brush holder
the rotary brush holder
Slide the rotary brush holder
place on the side of the storage tray
Fig. 4
■ 92 │ GB │ MT
1
(see section Filling the fresh water tank). Once
1
out of the catch opening with a pointed object. You can then
1
back out of the appliance (see fig. 2).
u
completely around the upper and lower cable
z/p
(see fig. 3).
5
(see fig. 4). To assemble the parking and cleaning station, slide
5
sideways into the opening on the storage tray
5
+
1
from the appliance, you must
q
from the appliance to reach the catch
q
, press the catch on the hand
downwards into the opening until it sits firmly in
4
(see fig. 5).
Fig. 5
4
and a rotary
4
.
SHBR 560 B1