Table of Contents
Advertisement
CD-BK3200V
45
46
47
10
11
< Importance >
Direct the recess part
(trapezoidal side) of the axis
35 in this direction.
Scale: 2 magnifications
29
26
23
25
27
37
38
34
TRAY DRIVE GEAR R
36
TRAY JOINT GEAR R
TRAY BIG GEAR SET POSITION
*2
*1
*1: To position the axis part of 36, engage it with 38.
*2: When it is aligned as described in *1, the hatched part
(low gear-height part of gear) will be positioned in this position.
Note: After positioning the tray big gear in the set position, engage these gears.
34
TRAY DRIVE GEAR R
36
TRAY JOINT GEAR R
24
23
29
31
M T SW PWB
Scale: 2 magnifications
33
TRAY GEAR B
Figure 18
– 18 –
Mark position
* This position becomes the
reference (stock) position
of the tray.
32
TRAY GEAR A
These holes must align.
33
TRAY
GEAR B
< Importance >
It must not rotate in contact
with the peripheral (hatched)
part of 31.
32
These holes must align.
After assembling 32,
33
assemble 33.
32
TRAY GEAR A
Advertisement
Table of Contents
