Assembly/Installation - Siemens 6 Series Compact Operating Instructions

Assembly/installation

Device damage
The device can overheat or materials become brittle through the influence of UV radiation.
• Protect the device from direct sunlight.
• Make sure that the maximum permissible ambient temperature is not exceeded. Read the
NOTICE
Incorrect installation
The device can be damaged or destroyed or its functionality impaired through incorrect
assembly.
• Make sure before installing the device that there is no visible damage.
• Check that the process connections are clean and the right seals and cable glands have been
• Mount the device using a suitable tool. Read the information in the manual/operating
NOTICE
Condensation in the device
Damage to device through formation of condensation if the temperature difference between
transportation or storage and the mounting location exceeds 20 °C (36 °F).
• Before taking the device into operation, let the device adapt for several hours in the new
Only Series 6 field devices and Series 7 wall mounted devices
Operator window damaged by impact energy
An operator window damaged by impact energy can cause gases to escape from the unit as a
result of such a leak.
• Ensure that the device is sufficiently protected against impact energy >2 Joule in the area of
Safety instructions
Compact Operating Instructions, 09/2018, A5E45779403002-01
CAUTION
information in the technical specifications of the respective manuals!
used.
instructions of the device in question!
environment.
WARNING
the windows.
4
11