Table of Contents
Advertisement
PAN9028 Wi-Fi/Bluetooth Module
The PAN9028 is capable of connecting to an existing access point while acting as an
access point itself.
The user interface is intuitive and will guide through the possible use cases.
1. Press Refresh (1) to update the list of found access points.
2. Select the Network SSID (2) of the access point that should be used.
3. Enter the matching network password (3).
4. Press Create Connection (4) to create the connection.
➔
The PAN9028 will connect to it. This takes approximately a couple of seconds.
Quick Start Guide Rev. 1.0
4 Basic Usage
Page 13 of 34
Advertisement
Table of Contents
