PAN9028 Wi-Fi/Bluetooth Module
➔
A new terminal window will be opened.
➔
The application scans for Wi-Fi access points in reach and lists them (1).
2. Select the access point that should be used as the responder: Type in the according
index (2) and press Enter .
➔
The application displays four options.
3. Type in 1 and press Enter to make a RTT measurement with the selected access
point.
➔
The application will be displayed the result of a single RTT measurement.
➔
At this point an action can be chosen:
4. Type in
–
1 to restart the measurement,
–
2 to scan for other access points,
–
3 to quit the application.
5. Press Enter to confirm.
Quick Start Guide Rev. 1.0
5 Full Usage
Page 26 of 34