Table of Contents
Advertisement
PAN9028 Wi-Fi/Bluetooth Module
4. Insert the USB keyboard into the USB hub (4).
5. Connect the serial port cable to the PC (5).
6. Insert headphones with a 3.5 mm jack into the green audio socket (6).
7. Insert the HDMI cable and connect it to an external HDMI monitor (7).
8. Insert the power supply (8).
➔
The system will boot up. This takes approximately one minute.
The boot process of the system is displayed on the attached monitor.
➔
When the boot process is finished, the Ubuntu desktop will be displayed
5.2
5.2 Login
Once the operating system has finished booting, you will be automatically logged in as the user
5.1 Setup
"ubuntu" (see
privileges.
The username of the default user is "ubuntu" and the password is always
"ubuntu".
Quick Start Guide Rev. 1.0
If no output can be seen on the attached monitor, please reselect
the signal source to force the monitor to update the signal
sources.
Login.
(Full)). No manual login is required. The "ubuntu" user has root
5 Full Usage
Page 22 of 34
Advertisement
Table of Contents
