Operation Mode Setting Switch (Mode) - Toshiba nv-pack Series Instruction Manual

3.1.2 Operation mode setting switch (MODE)

The operation mode setting switches are 4-bit dip switches.
Normal operation use switch set to all OFF.
Table 3-2 shows the descriptions of the switches.
Switch
Name Function
number
1 RV1 Reserved
2 RV2 Reserved
3 SYN Syn-node
Set off/on
4 RV3 Reserved
Table 3-2 Operation mode setting table
Setting
Not used
Not used
Set to syn-node setting as enable.
Off: disable On: enable
Not used
Unified Controller nv-pack series TC-net 100(JTNI)Extended card Instruction Manual
3.1 Switch Setting
Initial setting
(factory
setting)
off
off
off
off
13