Table of Contents
Advertisement
Chapter 3 Setting
• Be careful so that the address does not overlap with other nodes.
22
6F8C1621
Setting the module parameter.
Open the module parameter screen for the JTNI previously registered, then
setting tab of [Parameter].
Figure 3-8
Module parameter registration screen
Register the IP address type, IP address, and subnet mask.
Note
Individual settings are as follows.
· IP address type: Select from V Standard 1, V Standard 2, and Any.
Case as V Standard 1 sets.
IP address: 172.16.64.xx ("xx" indicates the value of the station address
setting switch.)
Subnet mask: 255.255.192.0
Advertisement
Table of Contents
