Timer Settings
Timer Settings
Timer Settings
The timer settings enables you to set the Sleep Mode.
Setting the Sleep Mode
Setting the Sleep Mode
If the machine remains idle for a certain period of
time, it automatically enters the Sleep mode.
The default settings are as follows:
–
<AUTO SLEEP>: ON
–
<AUTO SLEEP TIME>: 5MIN.
We recommend that you use this option in the
default setting.
1
Press
[Menu].
2
Press [
] or [
SETTINGS>, then press [OK].
M E N U
8
T I M E R
3
Press [
] or [
SLEEP>, then press [OK].
A U T O
4
Press [
] or [
press [OK].
A U T O
1-16
] to select <TIMER
S E T T I N G S
] to select <AUTO
S L E E P
] to select <ON>, then
S L E E P
5
Press [
interval, then press [OK].
A U T O
–
You can set the interval from 3 to 30 minutes
(in one-minute increments).
–
You can also enter values using
[numeric keys].
6
Press
standby mode.
–
machine enters the Sleep mode.
–
To enter the Sleep mode manually, press
–
The machine will not enter the Sleep mode
when:
•
•
•
•
•
O N
–
The machine will leave the Sleep mode when:
•
•
•
O N
] or [
] to select the desired
S L E E P
T I M E
[Stop/Reset] to return to the
[Energy Saver] lights green when the
[Energy Saver] on the operation panel.
the machine is in operation
the Processing/Data indicator lights or blinks
a message appears on the display and the
Error indicator blinks
paper is loaded in the multi-purpose tray
a paper jam occurs in the machine
you place documents in the ADF
you press
[Energy Saver] on the operation
panel
a print job is sent from a computer, and the
print is started
5 M I N .
–