2-Sided Copying
6
Press
[Start].
If you want to copy multiple documents using
the platen glass, place a document and press
[Start] once for each page. When scanning is
complete, press [OK].
–
To cancel all settings, press
–
When you switch the mode by pressing the
mode keys such as
will be canceled. If you want to keep the
settings, store the settings as follows:
[Menu] → <COPY SETTINGS> → <STANDARD
SETTINGS> → <2-SIDED> (See "COPY SETTINGS, "
on p. 10-3.)
–
You can skip step 4. In this case, the machine
scans 1-sided documents to make 2-sided,
<BOOK TYPE> copies.
2 to 2-Sided Copying (D460 Only)
You can make 2-sided copies from 2-sided
documents.
1
Place documents in the ADF.
For details, see "Placing Documents, " on p. 2-4.
2
Press
3-20
[Stop/Reset].
[SCAN], all settings
[COPY].
3
Press
[2-Sided] repeatedly to select
<2 > 2-SIDED>, then press [OK].
2 - S I D E D
4
Press [
] or [
TYPE> or <CALENDAR TYPE> for the
document layout, then press [OK].
T Y P E
O F
–
<BOOK TYPE>: The front and back sides of the
document will have the same top-bottom
orientation.
–
<CALENDAR TYPE>: The front and back sides
of the document will have the opposite top-
bottom orientation.
5
Press [
] or [
TYPE> or <CALENDAR TYPE> for the
output layout, then press [OK].
T Y P E
O F
–
<BOOK TYPE>: The front and back sides of the
copy will have the same top-bottom
orientation.
–
<CALENDAR TYPE>: The front and back sides
of the copy will have the opposite top-
bottom orientation.
6
Use
–
[numeric keys] to enter the
desired copy quantity (1 to 99).
Ex.
1 0 0 %
T E X T / P H O T O
2
>
2 - S I D E D
] to select <BOOK
O R I G I N A L
B O O K
T Y P E
] to select <BOOK
O U T P U T
B O O K
T Y P E
*
L T R
1