Changing Standard Mode
Changing Standard Mode
The Standard mode is the combination of copy modes that the machine automatically
applies when the power is turned ON, or when
the Standard mode to suit your needs.
The default settings are the followings:
–
<IMAGE QUALITY>: <TEXT/PHOTO>
–
<DENSITY>: <MANUAL> (5)
–
<ZOOM RATIO>: <100%>
–
<AUTO COLLATE>: <OFF>
–
<2-SIDED>: <OFF>
1
Press
[Menu].
2
Press [
] or [
SETTINGS>, then press [OK].
M E N U
2
C O P Y
3
Press [
] or [
SETTINGS>, then press [OK].
C O P Y
S E T T I N G S
1
S T A N D A R D
] to select <COPY
S E T T I N G S
] to select <STANDARD
S E T T I N G S
[Stop/Reset] is pressed. You can change
4
Press [
] or [
setting item, then press [OK].
S T A N D A R D
1
I M A G E
You can specify the following settings:
–
<IMAGE QUALITY>
–
<DENSITY>
–
<ZOOM RATIO>
–
<AUTO COLLATE>
–
<2-SIDED>
If you press
[Stop/Reset] before pressing [OK],
the setting will not be registered.
5
Press
[Stop/Reset] to return to the
standby mode.
Press
[Menu] to return to the previous display.
] to select the desired
S E T T I N G S
Q U A L I T Y
3-23