Download
Share
Print this page
ABB BSR10 Connection Diagrams
  1. Manuals
  2. Brands
  3. ABB Manuals
  4. Relays
  5. Sentry BSR10
  6. Connection diagrams

ABB BSR10 Connection Diagrams

Sentry safety relays
Hide thumbs Also See for BSR10:

Advertisement

Quick Links

Download this manual
—
S A FE T Y P R O D U C T S
Connection diagrams
Sentry safety relays

Advertisement

loading

Related Manuals for ABB BSR10

Summary of Contents for ABB BSR10

  • Page 1 — S A FE T Y P R O D U C T S Connection diagrams Sentry safety relays...
  • Page 2 13849-1/-2, such as product selection, product placement, cable installation, environmen- tal effects on the system etc. ABB does not accept any liability and/or responsibility whatsoever for any errors or lack of information in this document. It is the responsibility of the machine builder to make a risk...
  • Page 3 C O N N E C T I O N D I A G R A M S S E N T R Y — Table of contents Sentry connection diagrams SSR20 general BSR10 general SSR20 with JSTD25F/H BSR10 as Pluto expansion SSR20 with JSTD25K BSR10 with Inca1 SSR20 with JSTD1-A BSR11 general SSR20 with JSHD4-2-AJ-A BSR11 as Pluto expansion...
  • Page 4 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents SENTRY BSR10 Jokab Safety Note: It is the responsibility of the machine builder to make a risk assessment and make sure that the appropriate functional safety levels are achieved.
  • Page 5 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents PLUTO Safety outputs Safety outputs Jokab Safety SENTRY BSR10 SENTRY BSR10 Jokab Safety Jokab Safety According to EN ISO 13849-1 Note: The stated PL is only valid if all relevant requirements according to EN ISO 13849-1/-2 are met.
  • Page 6 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents INCA 1 SENTRY BSR10 Jokab Safety According to EN ISO 13849-1 Note: The stated PL is only valid if all relevant requirements according to EN ISO 13849-1/-2 are met.
  • Page 7 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents SENTRY BSR11 Jokab Safety Note: It is the responsibility of the machine builder to make a risk assessment and make sure that the appropriate functional safety levels are achieved. Safety Products...
  • Page 8 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents PLUTO Safety outputs Safety outputs SENTRY BSR11 SENTRY BSR11 Jokab Safety Jokab Safety According to EN ISO 13849-1...
  • Page 9 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents Transistor output Transistor output Transistor output Positive voltage Negative voltage Positive voltage with 0V supervison/control Relay output SENTRY BSR11/BSR10 SENTRY BSR11/BSR10 SENTRY BSR11/BSR10 SENTRY BSR11/BSR10 Jokab Safety Jokab Safety Jokab Safety Jokab Safety Note: It is the responsibility of the machine builder to make a risk assessment and make sure that the appropriate functional safety levels are achieved.
  • Page 10 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents SENTRY BSR23 Jokab Safety SENTRY BSR23 Jokab Safety Note: It is the responsibility of the machine builder to make a risk assessment and make sure that the appropriate functional safety levels are achieved. Safety Products...
  • Page 11 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents PLUTO Safety outputs Safety outputs Stat. input test Stat. input test SENTRY BSR23 SENTRY...
  • Page 12 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents PLUTO Safety outputs Stat. input test Cable to external cabinet SENTRY BSR23 Jokab Safety Cable to external cabinet...
  • Page 13 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents Transistor output Transistor output Transistor output Positive voltage Negative voltage Positive voltage with 0V supervison/control Relay output Test input...
  • Page 14 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents OSSD 1 OSSD 2 SENTRY SSR10 MODE Jokab Safety Note: It is the responsibility of the machine builder to make a risk assessment and make sure that the appropriate functional safety levels are achieved. Safety Products...
  • Page 15 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents E-STOP BUTTON INCA/SMILE SMILE 11 EA SENTRY SSR10 MODE Jokab Safety According to EN ISO 13849-1 Note: The stated PL is only valid if all relevant requirements according to EN ISO 13849-1/-2 are met.
  • Page 16 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents SMILE 11 RA SMILE 11 EA SENTRY SSR10 MODE Jokab Safety According to EN ISO 13849-1 Note: The stated PL is only valid if all relevant requirements according to EN ISO 13849-1/-2 are met.
  • Page 17 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents SENTRY SSR10 MODE Jokab Safety According to EN ISO 13849-1 Note: The stated PL is only valid if all relevant requirements according to EN ISO 13849-1/-2 are met. It is the responsibility of the machine builder to make a risk assessment and make sure that the appropriate functional safety levels are achieved.
  • Page 18 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents SENTRY SSR10 MODE Jokab Safety According to EN ISO 13849-1 Note: The stated PL is only valid if all relevant requirements according to EN ISO 13849-1/-2 are met. It is the responsibility of the machine builder to make a risk assessment and make sure that the appropriate functional safety levels are achieved.
  • Page 19 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents Adam M12-8 Adam M12-8 OSSD-Info General Code OSSD-Info General Code Adam M12-5 OSSD-Info General Code M12-3H...
  • Page 20 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents SENTRY SSR10 MODE Jokab Safety According to EN ISO 13849-1 Note: The stated PL is only valid if all relevant requirements according to EN ISO 13849-1/-2 are met. It is the responsibility of the machine builder to make a risk assessment and make sure that the appropriate functional safety levels are achieved.
  • Page 21 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents Orion3 Extended Active part Reset/ OSSD1 OSSD2 LAMP SENTRY SSR10 MODE Jokab Safety According to EN ISO 13849-1...
  • Page 22 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents SENTRY SSR10 MODE Jokab Safety According to EN ISO 13849-1 Note: The stated PL is only valid if all relevant requirements according to EN ISO 13849-1/-2 are met. It is the responsibility of the machine builder to make a risk assessment and make sure that the appropriate functional safety levels are achieved.
  • Page 23 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents SENTRY SSR10 MODE Jokab Safety According to EN ISO 13849-1 Note: The stated PL is only valid if all relevant requirements according to EN ISO 13849-1/-2 are met. It is the responsibility of the machine builder to make a risk assessment and make sure that the appropriate functional safety levels are achieved.
  • Page 24 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents HD5-S-104 HD5-S-102 3-pos enabling switch Signal LED Front button Top buttons 3-pos enabling switch Signal LED Front button...
  • Page 25 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents HD5-S-111 3-pos enabling switch Emergency stop Signal LED Front button Top buttons Home pos.
  • Page 26 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents Lightcurtain Eden on JSHD4 JSHD4 SENTRY SSR10 SENTRY SSR10 SENTRY SSR10 MODE MODE MODE...
  • Page 27 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents Lightcurtain Eden on JSHD4 JSHD4 SENTRY SSR10 SENTRY SSR10 SENTRY SSR10 MODE MODE MODE...
  • Page 28 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents E-STOP BUTTON INCA/SMILE SENTRY TSR10 SENTRY SSR10 MODE MODE Jokab Safety Jokab Safety According to EN ISO 13849-1...
  • Page 29 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents SENTRY SSR10 SENTRY BSR11 MODE Jokab Safety Jokab Safety According to EN ISO 13849-1 Note: The stated PL is only valid if all relevant requirements according to EN ISO 13849-1/-2 are met.
  • Page 30 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents A) Two signals from T1/T2 with Auto reset B) Two signals from T1/T2 with Manual reset SENTRY SSR10M SENTRY...
  • Page 31 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents A) Two-hand device / Auto reset A) Two-hand device / Manual reset SENTRY SSR20 SENTRY...
  • Page 32 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents JSTD25F JSTD25H SENTRY SSR20 SENTRY SSR20 MODE MODE Jokab Safety Jokab Safety According to EN ISO 13849-1 Note: The stated PL is only valid if all relevant requirements according to EN ISO 13849-1/-2 are met.
  • Page 33 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents JSTD25K M12-Connector E-STOP BUTTON SMILE 10EK Flange Receptacle 8-pole male Connection for PLUTO SENTRY SSR20 SENTRY...
  • Page 34 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents JSTD1-A JSTD1-A SENTRY SSR20 MODE Jokab Safety According to EN ISO 13849-1 Note: The stated PL is only valid if all relevant requirements according to EN ISO 13849-1/-2 are met.
  • Page 35 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents SENTRY SSR20 MODE Jokab Safety According to EN ISO 13849-1 Note: The stated PL is only valid if all relevant requirements according to EN ISO 13849-1/-2 are met. It is the responsibility of the machine builder to make a risk assessment and make sure that the appropriate functional safety levels are achieved.
  • Page 36 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents A) Two-hand device with Auto reset B) Two-hand device with Manual reset SENTRY SSR20M SENTRY...
  • Page 37 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents JSTD1-A JSTD1-A SENTRY SSR20M MODE Jokab Safety According to EN ISO 13849-1 Note: The stated PL is only valid if all relevant requirements according to EN ISO 13849-1/-2 are met.
  • Page 38 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents OSSD 1 OSSD 2 SENTRY SSR32 MODE Jokab Safety Note: It is the responsibility of the machine builder to make a risk assessment and make sure that the appropriate functional safety levels are achieved. Safety Products...
  • Page 39 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents OSSD 1 OSSD 2 SENTRY SSR42 MODE Jokab Safety Note: It is the responsibility of the machine builder to make a risk assessment and make sure that the appropriate functional safety levels are achieved. Safety Products...
  • Page 40 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents OSSD 1 OSSD 2 SENTRY TSR10 MODE Jokab Safety Note: It is the responsibility of the machine builder to make a risk assessment and make sure that the appropriate functional safety levels are achieved. Safety Products...
  • Page 41 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents Adam M12-5 Reset Pre-reset OSSD-Info General Code SMILE 11 RA SMILE 11 RA SENTRY TSR10 SENTRY...
  • Page 42 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents Inching of motor SENTRY TSR10 MODE Jokab Safety According to EN ISO 13849-1 Note: The stated PL is only valid if all relevant requirements according to EN ISO 13849-1/-2 are met.
  • Page 43 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents OSSD 1 OSSD 2 SENTRY TSR20 MODE Jokab Safety 0.5s 1.5s Note: It is the responsibility of the machine builder to make a risk assessment and make sure that the appropriate functional safety levels are achieved.
  • Page 44 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents SENTRY TSR20M MODE Jokab Safety 0.5s 1.5s Note: It is the responsibility of the machine builder to make a risk assessment and make sure that the appropriate functional safety levels are achieved. Safety Products...
  • Page 45 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents OSSD 1 OSSD 2 SENTRY USR10 MODE Jokab Safety Note: It is the responsibility of the machine builder to make a risk assessment and make sure that the appropriate functional safety levels are achieved. Safety Products...
  • Page 46 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents SMILE 11 EA SMILE 12 EA INCA 1 SENTRY USR10 MODE Jokab Safety According to EN ISO 13849-1...
  • Page 47 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents PLUTO Safety outputs SENTRY USR10 SENTRY USR10 MODE MODE Jokab Safety Jokab Safety According to EN ISO 13849-1...
  • Page 48 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents SENTRY USR10 SENTRY USR10 MODE MODE Jokab Safety Jokab Safety (without slide lock) (with slide lock) According to EN ISO 13849-1/2...
  • Page 49 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents SENTRY USR10 SENTRY USR10 MODE MODE Jokab Safety Jokab Safety (without slide lock) (with slide lock) According to EN ISO 13849-1/2...
  • Page 50 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents SENTRY USR10 SENTRY USR10 MODE MODE Jokab Safety Jokab Safety Note: The PL should be calculated using ISO/TR 24119 and EN ISO 13849-1/2 Safety Products...
  • Page 51 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents SENTRY USR10 SENTRY USR10 SENTRY SSR10 MODE Jokab Safety Jokab Safety Jokab Safety Note: It is the responsibility of the machine builder to make a risk assessment and make sure that the appropriate functional safety levels are achieved.
  • Page 52 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents SENTRY USR10 MODE Jokab Safety According to EN ISO 13849-1 Note: The stated PL is only valid if all relevant requirements according to EN ISO 13849-1/-2 are met. It is the responsibility of the machine builder to make a risk assessment and make sure that the appropriate functional safety levels are achieved.
  • Page 53 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents SENTRY USR10 MODE Jokab Safety According to EN ISO 13849-1 Note: The stated PL is only valid if all relevant requirements according to EN ISO 13849-1/-2 are met. It is the responsibility of the machine builder to make a risk assessment and make sure that the appropriate functional safety levels are achieved.
  • Page 54 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents SENTRY USR10 MODE Jokab Safety According to EN ISO 13849-1 Note: The stated PL is only valid if all relevant requirements according to EN ISO 13849-1/-2 are met. It is the responsibility of the machine builder to make a risk assessment and make sure that the appropriate functional safety levels are achieved.
  • Page 55 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents SENTRY USR10 MODE Jokab Safety According to EN ISO 13849-1 Note: The stated PL is only valid if all relevant requirements according to EN ISO 13849-1/-2 are met. It is the responsibility of the machine builder to make a risk assessment and make sure that the appropriate functional safety levels are achieved.
  • Page 56 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents JSTD25F JSTD25H SENTRY USR10 SENTRY USR10 MODE MODE Jokab Safety Jokab Safety According to EN ISO 13849-1 Note: The stated PL is only valid if all relevant requirements according to EN ISO 13849-1/-2 are met.
  • Page 57 C O N N E C T I O N D I A G R A M S S E N T R Y Back to table of contents OSSD 1 OSSD 2 SENTRY USR22 MODE Jokab Safety Note: It is the responsibility of the machine builder to make a risk assessment and make sure that the appropriate functional safety levels are achieved. Safety Products...
  • Page 58 We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document.

This manual is also suitable for:

Bsr11Bsr23Ssr10Ssr10mSsr20Ssr20m ... Show all