2 - 8
Fig. 9
Unpacking the printer
•
Turn the box with the printer upside down and open the bottom of the box.
•
Remove the foam material.
•
Remove the plastic bag.
•
Unscrew the wooden base plate.
•
Lift the printer carefully out of the box and place it on the floor in the upright position.
•
Turn the two transport locks into vertical position and pull out in vertical position
(Fig. 10).
NOTICE
Unpacking the framegrabber
•
Open the packaging of the framegrabber from the top.
•
Remove the framegrabber and the hand-held control unit.
•
Remove the plastic bag.
SIREMOBIL Compact
System Manual
Keep the two transport locks. If the printer needs to be replaced
or sent in, the transport locks must be re-inserted.
SPR2-130.814.01
Rev. 01
Fig. 10
Page 8 of 14
03.01
TD PS 24
Installation
2
2
Siemens AG
Medical Solutions