Fujitsu 690Tx User Manual page 161

Symptom
Shutdown and Startup Problems
The Suspend/Resume button does not work.
T r o u b l e s h o o t i n g
Possible Cause
3. The brightness is turned all the way up.
4. The batteries are very old.
5. The batteries have been exposed to
high temperatures.
6. The batteries are too hot or too cold.
(See Batteries on pages 29-31.)
1. The Suspend/Resume button is disabled from
the Advanced submenu of the Power Savings
menu of the setup utility.
2. You did not hold the button in long enough.
3. There may be a conflict with the
application software.
L i f e B o o k 6 0 0 S e r i e s f r o m F u j i t s u
Possible Solution
3. Turn down the brightness adjustment. The
higher the brightness the more power your
display uses.
4. Replace the batteries.
5. Replace the batteries.
6. Restore the notebook to normal operating
temperature. (The Charging icon on the
Status Indicator panel will flash when the
battery is outside its operating range.)
1. Enable the button from the setup utility.
(See page 88.)
2. Hold the button longer. This may need to be
a very long time if your app l i c a ti on is preven -
ting the CPU from ch ecking for but ton pushes.
3. Close all applications,and try the
button again.
151