Fujitsu 690Tx User Manual page 83

Table 3-5 Fields, Options and Defaults for the I/O Device Configuration Submenu
Menu Field Options
Serial port A: Auto; Disabled;Enabled.
Base I/O address: 3F8; 2F8; 3E8; 2E8.
(Displayed only when
serial port A is set
to Enabled.)
Interrupt:(Displayed only IRQ 4;IRQ 10;
when serial port A is set IRQ 11; IRQ 3.
to Enabled.)
C A U T I O N
The BIOS will warn you that there is a resource conflict by placing a yellow
asterisk next to the device(s) in conflict.
C o n f i g u r i n g Y o u r L i f e B o o k 6 0 0 S e r i e s
Default
[Enabled]
[3F8]
[IRQ 4]
L i f e B o o k 6 0 0 S e r i e s f r o m F u j i t s u
Description
Selects configuration method for serial port A. Serial port A is
the external serial port. The selection Auto makes the BIOS or
operating system choose the configuration. The Disabled selec-
tion means that serial port A is not configured for use. The
Enabled selection provides for configuration setup by the user.
When Enabled is selected the choices for setting Base I/O address
and Interrupt level are displayed.
Sets the Base I/O address for serial port A.
Sets the interrupt level for serial port A.
73