Fujitsu 690Tx User Manual page 84

S e c t i o n T h r e e
Table 3-5 Fields, Options and Defaults for the I/O Device Configuration Submenu
Menu Field Options
Serial port B: Auto; Disabled;Enabled.
Mode:(Displayed if FIR; IrDA.
serial port B is not
disabled.)
Base I/O address: 2E8; 3F8;2F8; 3E8.
(Displayed only when
serial port B is set
to Enabled.)
Interrupt:(Displayed only IRQ 4; IRQ 10;
when serial port B is set IRQ 11;IRQ 3.
to Enabled.)
Base I/O address: 118;100; 108; 110.
(Displayed only when
serial port B is set
to Enabled.)
74
Default Description
[Enabled] Selects configuration method for serial port B. Serial port B is the
serial port which is the infrared port. The selection Auto makes
the BIOS or operating system choose the configuration except for
mode. The Disabled selection means that serial port B is not con-
figured for use. The Enabled selection provides for configuration
setup by the user. When Enabled is selected the choices for setting
Base I/O address and interrupt level are displayed.
[FIR] Selects the speed and format of the infrared port.
[2E8] Selects the Base I/O address for serial port B.
[IRQ 3] Sets the interrupt level for serial port B.
[118] Sets the Base I/O address f or the FIR mode operation.