ABB Totalflow NGC8206 Startup Manual page 10

Step 14 Start PCCU32 Software
14A The user will need to start PCCU32, and move to the initial
screen.
14B If a communication error is received, click the Setup icon on the
main toolbar, and verify the PCCU com port. Based on the type
of connection the user needs, click the corresponding radio
button. Upon completion, click the Close button.
TIP: If the Invalid Security Code screen displays, enter four zeros
(0000) for the new code. Click OK. The NGC should have
defaulted to 0000 on start-up.
Step 15 NGC Start-Up Wizard
When PCCU establishes a connection with the NGC, the NGC Start-Up
Wizard begins automatically. This will only happen the first time the user
connects to the unit. In the event they do not finish the start-up, the Start-
Up Wizard will start again upon re-connection. This happens until the
Start-Up Wizard is complete. After start-up, the user can still access the
Start-Up Wizard under the Help menu on the initial (Local Connect)
screen.
The wizard will walk the user through the process of entering all the
necessary information to get the NGC up and running. Each screen has
8
Initial NGC Screen