Rollers - Fujitsu M4099D Reference Manual

Rollers

Cleaning the Rollers with Cleaning Sheets
Set the hopper table guides to B4
width. Then, set the offline feed
test mode as follows:
While pressing
power; the LCD displays "Please
wait" then the <<MODE SELECT>>
screen appears with SETUP
blinking. Press
blinks. Press
The OFFLINE FEED TEST screen
appears with START blinking.
Front
Hopper guide (left)
, turn on the
MENU
Õ
( ) twice; TEST
three times;
ENTER
Cleaning sheet
Remove the protective paper from
the cleaning sheet.
Protective paper
Place the cleaning sheet on the
hopper table by aligning it with the
hopper guide (left) with the
adhesive side up. Then press
; the cleaning sheet is fed.
ENTER
Cleaning
sheet
2-3