Front-Side Lamp - Fujitsu M4099D Reference Manual

Front-Side Lamp

Open the upper transport unit.
Remove the connector of the
front-side lamp unit.
Pull out the front-side lamp unit
toward the right.
Lamp
3-2
WARNING
Never replace the lamp without turning off the power.
Wait at least 3 minutes after turning off the power before touching the lamp.
ACHTUNG
Wechseln Sie niemals die Lampe ohne den Scanner auszuschalten.
Warten Sie mindestens 3 Minuten nach Ausschalten, bevor Sie die Lampe anfassen.
Front-side lamp unit (inside)
Rotate the lamp a half turn so that
the two terminals on each end
align with the slot on the lamp
socket and remove the lamp from
the front-side lamp unit.