Back-Side Lamp
Pull and open the side cover.
Remove the connector of the
back-side lamp unit.
Pull out the back-side lamp unit
toward the right.
Rail
Lamp
2-16
WARNING
Wait at least 3 minutes after turning off the power before cleaning.
ACHTUNG
Warten Sie nach dem Reinigen mindestens 3 Minuten bevor Sie den
Scanner wieder anschalten.
Side cover
Back-side lamp unit (inside)
Rotate the lamp a half turn so that
the two terminals on each end
align with the slot on the lamp
socket and remove the lamp from
the back-side lamp unit.