Fujitsu ScanSnap FI-5110C Operator's Manual page 109

CONTENTS CONTENTS
INTRODUCTION
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATIONS
3 SCANNING VARIOUS TYPES OF
DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
6.1 Removing Jammed Documents
6.2 Error Indications in the Operator Panel
6.3 Remedying Typical Troubles
6.4 Items to Check Before Contacting the Agent
Where You Bought the Scanner
6.5 Checking Labels on the Scanner
7 DOCUMENT SPECIFICATIONS FOR ADF
8 OPTIONS
9 SCANNER SPECIFICATIONS
Appendix
Symptom 9 : Multi feed errors occur frequently.
Back
Do the documents satisfy the
conditions described in "7.2 Document
Quality"?
Yes
When the multi feed detection is ON,
are the multi feed detection conditions
satisfied?
For details on multi feed, see
feed Detection Conditions".
Yes
Was the document fanned before
loaded onto the ADF paper chute?
Yes
Have the documents just been printed
out on a copier or laser printer?
No
Is the document stack 5 mm or less?
Yes
Are all the consumables (Pick roller
and Pad ASSY) installed correctly?
Yes
Is any of consumables (Pick roller and
Pad ASSY) dirty?
No
Is any of consumables (Pick roller and
Pad ASSY) worn out? (Check the
consumable counter)
No
Use documents that satisfy the
requirements.
For details on requirements, see
No
Document
Satisfy the multi feed detection
conditions.
For details on multi feed, see
"7.5 Multi
No
feed Detection
Fan the document before loading, or
reduce the number of sheets of the
document.
No
Fan the documents 3 or 4 times to
remove static electricity from the paper.
Yes
Reduce the number of sheets of the
document.
No
Correctly install the consumables if
needed.
No
Clean the dirty consumables.
For details on how to clean the
consumables, see
Yes
Inside of the
Replace the consumable, if needed. For
details on how to replace and attach
consumables, see
Yes
CONSUMABLES".
"7.2
Quality".
"7.5 Multi
Conditions".
"4.3 Cleaning the
Scanner"
"5 REPLACING