Fujitsu ScanSnap FI-5110C Operator's Manual page 13

CONTENTS CONTENTS
INTRODUCTION
Regulatory Information
Trademarks
Note, Liability
Preface
Safety Precautions
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATIONS
3 SCANNING VARIOUS TYPES OF
DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 DOCUMENT SPECIFICATIONS FOR ADF
8 OPTIONS
9 SCANNER SPECIFICATIONS
Appendix
Safety Precautions(2)
Do not install the scanner in locations subject to oil smoke,
steam, humidity, and dust.
Do not install the scanner in locations subject to oil smoke, steam, humidity, and
dust. Doing so might cause a fire or electric shock.
Turn the scanner OFF if it is damaged.
If the scanner is damaged for any reason, turn the scanner off and unplug the
power cable. Contact the store where you purchased the scanner.
Do not insert or drop metal objects in to the scanner. Do not scan wet
documents or documents with paper clips or staples. Do not splash or allow the
scanner to get wet.
If foreign objects (water, small metal objects, liquids, etc.) get inside the
scanner, immediately turn off the scanner and disconnect the power plug from
the power outlet. Then, contact the store where you bought the scanner or the
Maintenance Service Center. Pay particular attention to this warning in
households where there are small children.
Do not touch the inside of the scanner unless necessary.
Do not take apart or modify the scanner. The inside of the scanner contains high-
voltage components. Touching these components might cause electric shock or
fire.
Do not use the scanner if there is a strange odor.
If you detect heat coming from the device or detect other problems such as
smoke, strange smells or noises, immediately turn off the scanner and
disconnect its power plug. Make sure that any smoke coming from it has
stopped, before contacting the store where you bought the scanner or an
authorized FUJITSU scanner service provider.
1 3 4
2
Do not put liquids inside the scanner.
1 3 4
2