Terminology; Abbreviations - ABB COM600 Series Operator's Manual

1MRS756121
1.6.
1.7.
COM600 Station Automation Series
Operator's Guide
Entered value is not valid. The value must be 0 to 30.
• You may be told to enter the string MIF349 in a field. The string is shown as follows
in the procedure:
MIF349
•
Variables are shown using lowercase letters:
sequence name

Terminology

The following is a list of terms associated with the Control and Monitoring Unit COM605
that you should be familiar with. The list contains terms that are unique to ABB or have
a usage or definition that is different from standard industry usage.
Term
Alarm
Alarms and Events; AE
Device
Event
Intelligent Electronic Device
OPC
Property

Abbreviations

The following is a list of abbreviations associated with the Control and Monitoring Unit
COM605 that you should be familiar with. See also 1.6, Terminology.
Abbreviation Description
AE Alarms and Events
CET Communication Engineering Tool
DO Data Object
GW Gateway, component connecting two communication networks together
Description
An abnormal state of a condition.
An OPC service for providing information about alarms and
events to OPC clients.
A physical device that behaves as its own communication node
in the network, e.g. protection relay.
Change of process data or an OPC internal value. Normally, an
event consists of value, quality and timestamp.
A physical IEC 61850 device that behaves as its own commu-
nication node in the IEC 61850 protocol.
Series of standards specifications aiming at open connectivity
in industrial automation and the enterprise systems that support
industry.
Named data item.
COM605 3.1
7