Setup - Toro Pro Force Groundsmaster 3200 Series Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
Media and Additional Parts
Description
Operator's Manual
Note:
Determine the left and right sides of the
machine from the normal operating position.
Important:
To install and operate the debris
blower, the traction unit must be equipped with
the Auxiliary Hydraulics Kit (Model 31966) and the
Accessory Control Kit (Model 31994).
Description
Caster
Bolt
Flange locknut
Mounting plate assembly
Bolt (1/2 x 1-1/4 inches)
Locknut (1/2 inch)
No parts required
Debris blower assembly
U-bolt
Locknut (3/8 inch)
Stop plate
Carriage bolt (5/16 x 3-1/4 inches)
Locknut (5/16 inch)
No parts required
Whip guide
Whip guide bracket
U-bolt
Hex-head bolt (5/16 x 1 inch)
Flange nut (3/8 inch)
Flange nut (5/16 inch)
No parts required
Qty.
2
4
4
1
4
4
-
1
2
4
2
4
4
-
2
2
2
4
4
4
-
Qty.
1 Read before operating the machine.
5
Use
Remove the blower from the crate.
Install the mounting plate to the debris
blower frame.
Prepare the traction unit for installation.
Mount the blower to the traction unit.
Install the jack stand to the storage tube.
Install the whip guides.
Grease the machine.
Use