Bosch VIP XD Installation And User Manual page 20

EN | 20
Command entry
After the connection has been established, you must log on to the VIP XD. You
can then access the main menu. You can call up additional submenus and
functions using the on-screen commands.
– If necessary, turn off the local echo so that entered values are not repeated
on the display.
– Enter only one command at a time.
– After entering a value (such as an IP address), re-check the entry before
pressing the ENTER key to transfer the values to the VIP XD.
Assigning an IP address
To operate the VIP XD in your network, a valid IP address for the network must
be assigned.
The following default address has been pre-set at the factory: 192.168.0.1
– Start up a terminal program such as HyperTerminal.
– Enter the user name service. The main menu will be displayed.
– Enter the command 1 to open the IP menu.
– Enter 1 again. The current IP address will be displayed, and you will be
requested to enter a new IP address.
Installation
Installation and User Guide | VIP XD
Bosch Security Systems | 2005-05 | V1.0