Bosch VIP XD Installation And User Manual page 50

EN | 50
Resolution:
You can enter the desired screen resolution in pixels here. On digital flat screens
(LCD, TFT and others) the optimum resolution corresponds to the actual number
of pixels.
Note
By default, resolutions up to 800 × 600 pixels are supported.
Refresh rate:
Enter the desired refresh rate, based on the technical specification of the
monitor you are using. For fluid video playback, the setting 50Hz is used for PAL
sources and the 60 Hz setting for NTSC sources.
Note
For tube monitors, higher refresh rates may be useful for ergonomic
reasons. However, to prevent damage to monitors that do not support
these refresh rates, the exact monitor data must first be set using the
terminal program (see page 19).
Border top / bottom / left / right:
You can place a frame around the video image to make it easier to see. You can
set the width of all four borders individually. The color of the frame (gray tone)
can be specified in the Details window (see page 51).
horiz. spacing / vert. spacing:
For four-way division of the screen, in addition to the outer frame you can also
define separating lines between the different images. You can set the width of
the horizontal and vertical separating lines individually. The color is identical to
the frame color.
Screen position
You can move the video image horizontally and vertically within the screen area.
In addition, you can adjust the width and height of the video image.
– Click on one of the four arrows in the large monitor graphic to move the video
image in the corresponding direction.
– Click on the plus or minus symbols next to the small monitor graphics to
change the size of the video image.
Configuration using a Web Browser
Installation and User Guide | VIP XD
Bosch Security Systems | 2005-05 | V1.0