Bosch VIP XD Installation And User Manual page 40

EN | 40
Gateway IP address:
If you want the unit to establish a connection to a remote location in a different
subnet, enter the IP address of the gateway here. Otherwise, this field can
remain empty (0.0.0.0).
Video/audio transmission:
If the unit is used behind a firewall, TCP (Port 80) should be selected as the
transmission protocol. For use in a local network, choose UDP.
Warning!
Multicast operation is only possible with the UDP protocol. The TCP
protocol does not support multicast connections.
Note
The MTU value in UDP mode is 1514 bytes.
Ethernet link type:
If the VIP XD is connected to the network via a switch, both devices must have
the same preset network connection type. If necessary, ask your network
administrator what value the associated switch is set to.
The Auto setting automatically detects the network connection. If necessary,
you can specify the value 10 or 100 MBit/s for full or half-duplex mode (FD or
HD).
Warning!
Malfunctions can occur (for example image faults) if the capacity of the
network is not sufficient for transmission of the maximum data rate
generated by the transmitter.
Configuration using a Web Browser
Installation and User Guide | VIP XD
Bosch Security Systems | 2005-05 | V1.0