Bosch VIP XD Installation And User Manual page 56

EN | 56
Network
The settings on this page are used to integrate the unit into an existing network.
Warning!
Changes to the IP address, subnet mask or gateway address are
transferred to the unit by clicking Set. However, they only take effect after
the unit is restarted.
– Click Set after entering a new IP address.
– To do this, enter the old IP address followed by /reset (for instance
192.168.0.80/reset) in the address bar of your web browser. The
VIP XD will be restarted, after which it can only be accessed at the new IP
address.
Unit IP address:
Enter the desired IP address for the VIP XD in this field. The IP address must be
valid for the network.
Subnet mask:
Enter the appropriate subnet mask for the set IP address here.
Gateway IP address:
If you want the unit to establish a connection to a remote location in a different
subnet, enter the IP address of the gateway here. Otherwise, this field can
remain empty (0.0.0.0).
Video/audio transmission:
If the unit is used behind a firewall, TCP (Port 80) should be selected as the
transmission protocol. For use in a local network, choose UDP.
Configuration using a Web Browser
Installation and User Guide | VIP XD
Bosch Security Systems | 2005-05 | V1.0