Silvercrest 354199 2010 Operating Manual page 80

In the default setting, two heating phases are pre-
programmed.
First stage: 00:00 - 06:00, standard value is 17 °C
•
Second stage: 06:00 - 09:00, standard value is 21 °C
•
Third stage: 09:00 - 17:00, standard value is 17 °C
•
Fourth stage: 17:00 - 23:00, standard value is 21 °C
•
Fifth stage: 23:00 - 24:00, standard value is 17 °C
•
In the case of days which are not programmed, the
preset heating and energy-save times remain active.
1� Press the Menu button (10 a) and keep it
pressed until the menu appears.
2� Select the menu option
ton (10 b) to confirm your selection.
appears in the display (3) as well as the se-
lected day/range of days (6). If you want to set
an individual program for a range of days, use the
Setting wheel (5) to select the corresponding entry.
3� Select the day/range of days (6).
Press the OK button (10 b) to confirm your se-
lection�
4� Set the start of the 1st heating time ( ).
Press the OK button (10 b) to confirm your in-
put.
5� Set the heating temperature. Press the OK but-
ton (10 b) to confirm your input.
6� Set the start of the 1st energy-save time ( ).
Press the OK button (10 b) to confirm your in-
put.
80
Gi
. Press the OK but-