Troubleshooting - Silvercrest 354199 2010 Operating Manual

2� Turn the Setting wheel (5) clockwise until
appears in the display (3).
3� Wait until the radiator valve is fully open.
4� Turn the union nut (1) counterclockwise to
loosen it from the radiator valve.
12� Troubleshooting
The equipment does not function as you want! Try
and solve the problem with the aid of the solutions
proposed below.
Caution! Risk of burns through
hot radiator valve! Contact could
lead to hands being burned.
▸ Allow the radiator to cool down be-
fore completing any installation, dis-
assembly or repair work on the de-
vice!
▸ Wear work gloves!
What must I do if I want the use the de-
vice, which is already installed, on a dif-
ferent radiator? Reset the device to its default
factory settings (refer to Section Resetting the De-
fault Factory Settings on Page 83).
appears in the display
The battery charge status is displayed in the follow-
ing levels
>= 20% and
for new ones of the same type.
86
Gi
>= 80%,
< 20%. Change the batteries
>= 60%, >= 40%,