Loading Envelopes - Canon PIXMA IP90v Quick Start Manual

Basic Printing
Note • Do not stack more than 10 sheets in the Paper Output Slot Cover.

Loading Envelopes

Use either DL or US Comm. #10 size envelopes.
Important • Do not use envelopes with embossed or treated surfaces, a double
(2) Slide the Paper Guide against the left side of
the envelope.
(3) Select Envelope Envelope in Media Type Envelope Envelope
Page Size. Page Size Page Size Page Size
For the printer driver setting, refer to "Printing with Windows
"Printing with Macintosh Printing with Macintosh" on page 12. Printing with Macintosh Printing with Macintosh
6
• Do not touch the printed surfaces until the ink dries. For specific
drying times, refer to the instructions packaged with your media.
flap, pressure seals or sticker flaps.
• Select either DL Env. DL Env. or Comm. Env. #10
DL Env. DL Env.
size you are using.
Media Type, and then select Comm. Env. #10 Media Type Media Type
Comm. Env. #10 according to the envelope
Comm. Env. #10 Comm. Env. #10
Fold the envelope flap shut.
Comm. Env. #10 or DL Env Comm. Env. #10 Comm. Env. #10
Printing with Windows" on page 10,
Printing with Windows Printing with Windows
(1) Align the envelope
against the right side of
the Auto Sheet Feeder.
The flap of the envelope
will appear with its flap
facing up on the left side.
A maximum of 5
envelopes can be loaded
at once.
Printing direction
DL Env. in DL Env DL Env