Epson SD-10 User Manual page 22

SD-10 User's Guide
C
Displays the color difference (ΔE*) between the current color and the last color when you go on to measure the
next item.
D
The color being measured is displayed around the edges of the screen.
G
When color measurement is complete, close the sensor cover and turn off the device.
Note:
In this mode, you can automatically save up to 100 instances of color measurement data to the device. When this reaches
100 items, you need to choose whether to automatically delete the oldest data first, or manually delete unnecessary data
from the history data.
When the following screen is displayed, select Auto or Manual.
❏ When you select Auto
Whenever the number of color measurement data entries exceeds 100, the oldest data is automatically deleted.
When you select Auto, Auto Delete Data is set to On in the Settings menu, and automatic data deletion is enabled
until you change the setting.
❏ When you select Manual
The history screen is displayed. Add the data you want to save to your favorites, select Edit, and then select Delete by
Date or Delete All to delete the data by group or to delete all of the data groups.
To register color measurement data to your favorites, select the data group on the history screen, and then specify and
register the individual color measurement data entry. See the following for details.
"Editing History Data" on page 16
U
You can also set automatic data deletion in
Spot Mode
- Measurement Settings - Auto Delete Data.
22